DO YOU HAVE

THE FOLLOWING PROBLEMS

My project has very good prospects, but I don’t know which solution is more suitable for me.

My factory is about to start construction and I don’t want to wait too long.

I prefer German and Japanese brands, but they are too expensive.

My equipment often fails, affecting my normal production.

FOUND US
YOU HAVE WON HALF

ALPA’s Impact Mill

According to the material characteristics requirements, can be customized and widely used for fine grinding and superfine grinding of chemical, pharmaceutical, food, mineral, building materials and other materials. The particle size range is 20mesh ~ 3000mesh, Production capacity is 5kg/h ~ 5000kg/h. Cold air, air circulation and nitrogen circulation processes are available.

2020-03-10T15:35:27+08:00

RTM Turbo Mill

  • Conic rotor and stator are installed, fineness and output can be controlled by adjusting the gap between the rotor and the stator.
  • The rotor and the stator are made of special wear-resistant steel and thus have long service life.
  • The linear speed of grinding rotor can be up to 130m/s, good grinding effect.
  • Suitable for depolymerizing nano and micron material.
    • 2020-03-10T15:47:38+08:00

    RLM Ring Roller Mill

  • Relying on the grinding roller orbital revolution and rotation on the grinding ring track to finish grinding.
  • Built-in classifying wheel, available D50:2～45μm.
  • Compared with Raymond mill or ball mill, finer powder, lower operating cost.
  • Suitable for ultra-fine processing of nonmetallic minerals such as calcium carbonate.
    • 2020-03-10T15:55:26+08:00

    MZ Herb Vibration Mill

  • Suitable for grinding high tenacity and fiber materials that are difficult to be ground.
  • Grinding is in fully closed state, free of dust, high collecting efficiency.
  • Grinding chamber with cooling jacket, operating at temperature of -30ºC～0ºC.
    • 2020-03-10T16:03:16+08:00

    MZ Vibration Mill

  • Suitable for grinding raw materials with Moh’s hardness below 9.
  • Compared with ball mill, higher grinding efficiency, small occupation.
  • Particle size can be adjustable by adjusting parameters such as grinding medium, amplitude, and frequency. The finer powder can be given in conjunction with classifier in series.
  • Suitable for powder mixing, surface coating.

    • Engineering cases

    37 companies listed in 500 international top-class ones , 89 companies listed in 500 Chinese top -class ones , 169 national level key laboratories and other customers are more than 3000. The next story is told by you.

    “I don’t know how to choose the best for me.”

    IT DOESN’T MATTER
    LET US HELP YOU!

    The raw material and the particle size, output, and application industry of the finished product determine the choice of equipment and process. As an expert, you will not be unfamiliar with this.If you have any questions, don’t worry, please leave us a message, or “Live Chat” in the lower corner of this page, or contact us via our phone or email.

    ANY QUESTIONS OR DEMANDS
    PLEASE CONTACT US RIGHT NOW!

    [email protected]

    Learn More & Get Quotation

    Please tell us your needs.
    Our engineer will send you solutions and quotes for free.

    Or email

    [email protected]