MZ Vibration Mill

Widely used in chemical, mineral, building materials, metallurgy, abrasives, ceramics, refractory materials, food, health care products, new materials and other industries.

  • Available D50:2.5～150μm
  • Suitable for grinding raw materials with Moh’s hardness below 9.
  • Compared with ball mill, higher grinding efficiency, small occupation.
  • Particle size can be adjustable by adjusting parameters such as grinding medium, amplitude, and frequency. The finer powder can be given in conjunction with classifier in series.
  • Grinding media and liners can be made of special materials such as high manganese steel, high chromium steel, stainless steel, alumina, zirconia, quartz, etc., which are wear resistant and less pollution.
  • Air spring or rubber spring, instead of hard spring, long service life, good damping effect and low noise.
  • Compact structure and small occupation.easy to disassemble and clean
  • Lower installation power, wide application, high cost-performance.
  • PLC control system, easy operation.
  • Suitable for powder mixing, surface coating,mechanical chemical modification, etc.
  • For heat sensitive and low melting materials, it can be crushed by water cooling or strong cooling.
  • Finer powder can be given if to be used with classifier.
  • Explosion-proof design can be selected to meet the requirements of ultra-fine grinding processing of flammable and explosive oxide materials.
MZ Vibration Mill

Working Principle

With the high-speed vibrator or vibration motor, the grinding media (pins, cylpebs or balls) would vibrate in high frequency, high-speed rotating and slow revolving, which would impact, rub and shear materials around them and make them into fine powder and mix them evenly.

MZ Vibration Mill

Technical Parameters

Medium and small Amplitude Vibration Mill Technical Parameter
Parameter MZ10 MZ30 MZ50 MZ100 MZ200 MZ300 MZ500
Chamber Volume(L) 10 30 50 100 200 300 500
Input Particle Size (mm) 5 5 5 10 10 10 10
Produce Size (um) 10-150 10-150 10-150 10-150 10-150 10-150 10-150
Production Capacity (kg/h) 1-5 5-20 10-50 20-150 50-300 100-500 150-800
Power (KW) 0.75 1.5 2.2 3.7 7.5 11 15
Big Amplitude Vibration Mill Technical Parameter
Parameter MZ100 MZ300 MZ500 MZ600 MZ800 MZ1000 MZ1200 MZ2000
Chamber Volume(L) 100 300 500 600 800 1000 1200 2000
Input Particle Size (mm) 5 5 5 5 5 5 5 5
Produce Size (um) 10-150 10-150 10-150 10-150 10-150 10-150 10-150 10-150
Production Capacity (kg/h) 100-200 200-300 300-600 400-800 500-1000 800-1500 1000-1800 2000-3000
Power (KW) 15 45 55 75 90 110 150 220

Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.

MZ Vibration Mill

Album

“I don’t know how to choose the best for me.”

IT DOESN’T MATTER
LET US HELP YOU!

The raw material and the particle size, output, and application industry of the finished product determine the choice of equipment and process. As an expert, you will not be unfamiliar with this.If you have any questions, don’t worry, please leave us a message, or “Live Chat” in the lower corner of this page, or contact us via our phone or email.

ANY QUESTIONS OR DEMANDS
PLEASE CONTACT US RIGHT NOW!

[email protected]

Learn More & Get Quotation

Please tell us your needs.
Our engineer will send you solutions and quotes for free.

Or email

[email protected]